In 1757, the Ordnance Department came up with this simplified musket to arm all new Marine & Militia recruits brought by the passage of the Militia Act of 1757. It was basically a trimmed down 1755 with a wooden ramrod, no thumb piece, no rear thimble and no nose cap. The butt plate finial was also changed, held in place with a screw instead of a pin. These guns were not required to be fine finished or polished. Barrels were 42", side plates were flat mounted flush in the stock. In 1759 this version was changed to except a steel rammer with 1756 pattern thimbles an adding a nose cap.
729 | Set of Lock Castings | $150.00 | |
729 AS | Assembled Lock | $495.00 | |
729 LP | •Lock Plate | $24.95 | |
729 C | •Cock | $24.95 | |
729 TJ | •Top Jaw | $18.95 | |
729 F | •Frizzen | $24.95 | |
729 FS | •Frizzen Spring | $23.95 | |
729 T | •Tumbler | $18.95 | |
729 B | •Bridle | $18.95 | |
729 S | •Sear | $18.95 | |
729 SS | •Sear Spring | $19.95 | |
729 MS | •Main Spring | $23.95 | |
729 TJSX | Top Jaw Screw | $12.95 | |
729 LSS | Lock Screw Set | $24.95 | |
729 BP | Butt Plate | $39.95 | |
729 TG | Trigger Guard | $39.95 | |
729 TP | Trigger Plate | $15.95 | |
729 TR | Trigger | $12.95 | |
729 SP | Side Plate | $18.95 | |
729 SLSX | Side Lock Screw (2 Needed) | $6.95 | |
729 FT | Front Thimble (3 Needed) | $16.95 | |
729 FSSW | Front Sling Swivel | $16.95 | |
729 FSSWS | Front Sling Swivel Stud | $5.95 | |
729 FSSWSX | Front Sling Swivel Screw | $2.95 | |
729 RSSW | Rear Sling Swivel | $16.95 | |
729 RSSWSX | Rear Sling Swivel Screw | $2.95 | |
729 BA | Barrel | $375.00 | |
729 BRP | Breech Plug | $24.95 | |
729 BUL | Barrel Underlug (4 Needed) | $2.95 | |
729 TASX | Tang Screw | $4.95 | |
729 ST | Stock | $325.00 | |
729 RRT-B | Ramrod Tip (Brass) | $7.95 | |
729 RR | Ramrod (Tapered, Brass Tip) | $39.95 | |
729 BAY | Bayonet | $125.00 | |
729 PARTS | Parts Set with Set of Lock Castings | $1,195.00 | |
729 PARTSAS | Parts Set with Assembled Lock | $1,495.00 |
•Included in a Set of Lock Castings.